CA6140车床后托架831001加工工艺钻M6底孔夹具设计.zip
宁课程设计(论文)后托架加工工艺及夹具设计所在学院专 业班 级姓 名学 号指导老师 年 月 日I摘 要在生产过程中,使生产对象(原材料,毛坯,零件或总成等)的质和量的状态发生直接变化的过程叫工艺过程,如毛坯制造,机械加工,热处理,装配等都称之为工艺过程。在制定工艺过程中,要确定各工序的安装工位和该工序需要的工步,加工该工序的机车及机床的进给量,切削深度,主轴转速和切削速度,该工序的夹具,刀具及量具,还有走刀次数和走刀长度,最后计算该工序的基本时间,辅助时间和工作地服务时间。关键词 工序,工艺,工步,加工余量,定位方案,夹紧力II ABSTRACTEnable producing the target in process of production(raw materials,the blank,state of quality and quantity on part become always)take place direct course of change ask craft course,if the blank is made,machining,heat treatment,assemble etc.and call it the craft course.In the course of making the craft,is it confirm every erector location and worker step that process need this of process to want,the locomotive of processing,this process,and the entering the giving amount of the lathe,cut depth,the rotational speed of the main shaft and speed of cutting,the jig of this process,the cutter and measuring tool,a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves,calculate basic t
收藏
编号:140077
类型:共享资源
大小:1.98MB
格式:ZIP
上传时间:2023-09-07
30
金币
- 关 键 词:
-
20
ca6140
车床
托架
加工
工艺
m6
底孔
夹具
设计
- 资源描述:
-
宁课程设计(论文)后托架加工工艺及夹具设计所在学院专 业班 级姓 名学 号指导老师 年 月 日I摘 要在生产过程中,使生产对象(原材料,毛坯,零件或总成等)的质和量的状态发生直接变化的过程叫工艺过程,如毛坯制造,机械加工,热处理,装配等都称之为工艺过程。在制定工艺过程中,要确定各工序的安装工位和该工序需要的工步,加工该工序的机车及机床的进给量,切削深度,主轴转速和切削速度,该工序的夹具,刀具及量具,还有走刀次数和走刀长度,最后计算该工序的基本时间,辅助时间和工作地服务时间。关键词 工序,工艺,工步,加工余量,定位方案,夹紧力II ABSTRACTEnable producing the target in process of production(raw materials,the blank,state of quality and quantity on part become always)take place direct course of change ask craft course,if the blank is made,machining,heat treatment,assemble etc.and call it the craft course.In the course of making the craft,is it confirm every erector location and worker step that process need this of process to want,the locomotive of processing,this process,and the entering the giving amount of the lathe,cut depth,the rotational speed of the main shaft and speed of cutting,the jig of this process,the cutter and measuring tool,a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves,calculate basic t
展开阅读全文
知享网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。