资源地图

托架工艺及钻φ9孔夹具设计.rar
手柄座工艺及钻φ30孔夹具设计【中心距80】.rar
底座加工工艺及铣上下端面夹具设计.rar
工件10工艺及钻5-φ5孔夹具设计.rar
底座加工工艺及钻4-φ28孔夹具设计.rar
机油泵传动轴支架工艺及钻3-φ11孔夹具设计【版本2】.rar
手柄座工艺及铣M8孔端面夹具设计【中心距80】.rar
钻床主轴套筒车φ50外圆夹具设计【长度175】.rar
模具典型零件工艺及铣夹具设计.rar
底座加工工艺及铣U形槽夹具设计.rar
箱体工艺及钻4-φ13孔夹具设计【宽度124】.rar
电机盖工艺及车φ20孔夹具设计.rar
手柄座工艺及钻φ10孔夹具设计【中心距80】.rar
轴工艺及钻φ8孔夹具设计【长度120】.rar
壳体工艺及钻φ8孔夹具设计.rar
双联齿轮工艺及拉花键孔夹具设计【间距56】.rar
底座加工工艺及钻φ10锥孔夹具设计.rar
轴承架工艺及钻2-φ11孔夹具设计【版本2】.rar
接头工艺及铣40mm侧面夹具设计.rar
阀体工艺及车孔夹具设计-回转分度车床夹具.rar